Advertisement
Quick Links
Advertisement
Related Manuals for Model Space PORCHE 911 Carrera RS 2.7
Summary of Contents for Model Space PORCHE 911 Carrera RS 2.7
- Page 1 Build the legendary P O R S C H E RS 2.7 Pack 1...
- Page 2 Build the legendary P O R S C H E RS 2.7 Contents Contents PAGE STAGE The boot lid The right front wheel The steering system The chassis front Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE.
- Page 3 Step by Step Stage 1: The boot lid In this stage, you will assemble the boot lid, which is positioned at the front of the car, with its hinges, lock, lighting and badge. YOUR PARTS 1K 1M DIAGRAM Boot lid Boot hinge left Boot hinge right Boot reinforcement...
- Page 4 PORSCHE CARRERA 911 STEP Remove the two pads from the sprue (1E). Insert a pad into each of the two indicated holes in the boot reinforcement (1D). Push them into the holes as far as they will go. STEP Insert the boot lock (1I) into the boot lock plate (1H)and secure with a BP screw.
- Page 5 Step by Step STEP Insert the boot light case (1G) into the indicated hole in the boot reinforcement. STEP Place the boot light (1N) into the hole in the boot lid (1A), as shown in the inset. Place the boot lid reinforcement onto the boot lid, and secure with five AM screws.
- Page 6 PORSCHE CARRERA 911 STEP Fit the right hinge (1C) to the other side of the boot lid with two BM screws, as shown. STEP Use tweezers to remove the badge sticker (1F) from the backing sheet (inset) and place it onto the boot lid. STAGE COMPLETE Here is how your assembly should look at the end of this...
- Page 7 Step by Step Stage 2: The right front wheel In this stage, you will assemble the right front wheel. YOUR PARTS Tyre Shock absorber body Right front brake hose E-ring 1.7 x 3mm screws Wheel Spring 2 x 4mm screws Hub cover Brake disc 2.3 x 5mm screws...
- Page 8 PORSCHE CARRERA 911 STEP Insert the wheel (2C) into the tyre (2A), then place the rim (2B) into the wheel. Align the holes of the wheel and the rim, and fix them together with three BM screws. STEP Secure the front brake caliper A (2L) to the right front hub (2F) with two AM screws.
- Page 9 Step by Step STEP Place the brake disc (2K) onto the hub. Then place the brake caliper B (2M) over it, aligning the holes with those in brake caliper A, and secure them together with two AP screws. STEP Now take the shock absorber body (2H) and place the spring (2J) and shock absorber tube...
- Page 10 PORSCHE CARRERA 911 STEP Insert the hub into the wheel, then place the washer (2E) into the hole in the rim and tighten a CM screw into it. STEP Place the hub cover (2D) into the hole in the centre of the rim.
- Page 11 Step by Step Stage 3: The steering system In this stage, you will assemble the steering system and the left front wheel hub. YOUR PARTS Steering links (2) Steering rack Steering rack housing 1 Steering rack housing 2 Left front hub Shock absorber tube Shock absorber body E-ring...
- Page 12 PORSCHE CARRERA 911 STEP Place the steering links (3A) onto either end of the steering rack (3B), and secure them with two DM screws. STEP Fit the steering rack between the two steering rack housing parts (3C and 3D), and secure them together with two AP screws.
- Page 13 Step by Step STEP Combine the left front brake hose (3M) with the connector (3L). Then place the connector into the hole in the middle of caliper A (3J). STEP Secure the brake caliper (3J) to the left front hub (3E) with two AM screws.
- Page 14 PORSCHE CARRERA 911 STEP Fit the first shock absorber mount (3P) to the bottom of the shock absorber body with a DM screw. 3-10 STEP Fit the second shock absorber mount (3P) to the right front wheel assembly from the previous stage with a DM screw, as shown.
- Page 15 Step by Step Stage 4: The chassis front In this stage, you will be assembling more of the suspension, using the parts provided and those from Stage 3. YOUR PARTS DIAGRAM Chassis front Left front suspension arm bracket Right front suspension arm bracket Front anti-roll bar rods 1 (2) Front anti-roll bar rods 2 (2) Front anti-roll bar...
- Page 16 PORSCHE CARRERA 911 STEP Combine the two sets of anti- roll bar rods (4D and 4E), as shown, fixing them together with DM screws. The anti-roll bar rods 1 (4D) should be positioned on the outside. STEP Place the anti-roll bar rods onto the ends of the front anti-roll bar (4F), and fix them there with...
- Page 17 Step by Step STEP Retrieve the front crossmember assembly from the previous stage. Place the two posts on the underside into the corresponding holes in the chassis front, then secure with CM screws. STEP Insert the ends of the right front suspension arm (3T), marked R, and the left front suspension arm (3O), marked L, into the holes in the front of the crossmember and the grooves in the chassis front.
- Page 18 PORSCHE CARRERA 911 STEP Place the two front suspension arm brackets over the fronts of the suspension arms. The right front suspension arm bracket (4C), marked R, fits over the right front suspension arm (3T). The left front suspension arm bracket (4B), marked L, fits over the left arm.
Need help?
Do you have a question about the PORCHE 911 Carrera RS 2.7 and is the answer not in the manual?
Questions and answers