Nevir NVR-4901 6K1000 Manual page 25

The Functions of the control panel
The control Panel
1. Function
Economy
Select this button to reduce energy and water consumption when washing a smaller load. Once the
function is selected and the machine is running, it cannot be canceled even though it pauses. The
function is not available on all programs. The detail is in Form 1 on page 8.
Anti-Ironing
Select this button to reduce the wrinkle of clothes during a wash cycle. Once this function is
selected, the machine will not execute the last drain unless the "Start/Pause" button is pressed.
This function is available on all programs except spin.
(Note: The max running time of this function is 12 hours. If it exceeds 12 hours, the machine will
drain and spin automatically)
Rinse+
Select this button to add an extra rinse on the program you selected. This function is available on
all programs but spin.
2. Delay
Select this button to delay the starting of a wash cycle. The available options are "3h", "6h" and
"12h".
3. Start / Pause
Press this button to start or pause a wash cycle. The door cannot be open when the machine
pauses.
4. Knob
Turn this knob clockwise or anticlockwise to select the required wash program. Once the
"Start/Pause" button is pressed and the machine is running, the program cannot be changed. The
details of programs are in Form 1 on page 8.
(Note: At the end of a wash cycle, the knob must be turned to the position" ")
Standard 60 °C and standard 40 °C are suitable to clean normally soiled cotton laundry and they
are the most efficient programs in terms of combined energy and water consumptions for
washing that type of cotton laundry; in addition, the actual water temperature may differ from
the declared cycle temperature.
For your safety, please not turn the knob to the position " O " and get clothes
while the machine is running. Because the temperature of water may be high and it
Note
may scald you. The door lock will open automatically at the end of a wash cycle
while the temperature of the drum is cool down.
Use Process
25