Westinghouse SP6390 Operation Manual page 4

4. Ensure the power socket is in good condition and properly connected.
Ensure that the appliance is properly connected and that the plug is not
over-loaded or over-heated.
5. Only use the appliance on a dry, stable and level surface.
6. Ensure that the appliance operates at a minimum distance of 4 inches
adjacent to walls or objects.
7. Do not push, lean against or exert excessive force on any part of the
appliance. Do not stick sharp objects into any part of the appliance.
8. If the HEPA Filter or/and NCCO Reactor is not installed properly, the
appliance would not operate.
9. Maintain good air circulation when using the appliance.
10. Prior to cleaning and maintenance, the appliance must be disconnected
from the power supply.
11. When the appliance is turned on for the first time, warm air with mineral
smell may be released from the air outlet. This is normal as catalytic
oxidation is taking place inside the NCCO Reactor.
12. The appliance is equipped with a special protection feature. When
running with external power supply, it will stop operating with indicating
light off for 30 minutes, for every 8 hours of non-stop operation. After
that, the appliance will resume operating automatically.
13. To reduce the risk of electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact qualified personnel to install the proper
outlet. Do not alter the plug in any way.
14. The appliance is not to be operated by any supply sources other than
that specified above.
PLEASE DO NOT RETUN TO STORE
IF YOU HAVE QUESTIONS OR PROBLEMS
PLEASE CONTACT CUSTOMER SERVICE
IN CANADA:
Toll Free: 1-844-455-4621
Email: service@jakeglobal.com
IN THE UNITED STATES:
Toll Free: 800-239-0689
Email: SourceProUSA1@gmail.com
4