Warranty And Support; Recycling; Technical Specifications - Philips Lumea BRI947 Manual

Problem
The results of the
treatment are not
satisfactory.

Warranty and support

Recycling

Technical specifications

Transport and storage
conditions
Operating temperature
conditions
Emitted wavelengths
Pulse duration
Possible cause
You have used a light
intensity setting which is
too low for you.
You did not flash an area
adjacent to an area you
treated before.
The device is not effective
on your body hair color.
You do not use the device
as often as recommended.
You respond more slowly
to IPL treatment.
If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.
- This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
- Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.
Lumea Prestige remains operational in NORMAL USE within its
specification after transport or storage in the following environmental
range:
-25 °C to +70 °C up to 90 % RH, non‑condensing, 700 hPa to 1060 hPa
Lumea Prestige complies with its specifications when operated in NORMAL
USE under the following environmental operating conditions:
+5 °C to +35 °C up to 90 % RH, non-condensing, 700 hPa to 1060 hPa
565 to 1400 nm
1 - 2.5 ms, for all settings
Solution
Select a higher setting next time.
You have to release the flashes close to, but
not overlapping, the previous spot.
If you have light blond, grey, red or white hair,
the treatment is not effective.
To remove all hairs successfully, we advise you
to follow the recommended treatment
schedule. You can reduce the time between
treatments, but do not treat more often than
once every two weeks.
Continue using the device for at least 6
months, as hair regrowth can still decrease
over the course of this period.
29
English