H3E Board Removal; H4 Board Removal; Ip5 Board Removal (40/46 Inches) - Sony KDL-40V4000 Service Manual

2-9. H3E Board Removal

To remove the 'H3E' board disconnect the connector and then release
the 2 clips circled and gently ease the board towards you and away from
the back of the TV set.
Ver 2.0

2-11. IP5 Board Removal (40/46 inches)

To remove the 'IP5' board disconnect all connectors and then remove
the 6 screws circled and ease the board gently away from the back of the
TV set. It is vital to replace the 4 metal washers when replacing the 'IP5'
board as they are a countermeasure for drop test.
Note: Refer to page 4 - Hirose MDF61 connector.
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8
All manuals and user guides at all-guides.com
Clips
Screws

2-10. H4 Board Removal

Clip
To remove the 'H4' board disconnect the connector and then release the
1 clip circled and ease the board gently towards you and away from the
back of the TV set.
- 11 -