Contax NX Instruction Manual page 59

13-1BC(E)_P095-107 11/15/01
5. Contax Mount adapter NAM-1
1
3
1
2
4
2
This adapter allows the use of Contax 645 System lenses with the Contax NX.
Usable with all NX models.
<Mounting the mount adapter and lens>
1. Line up the body mount mark on the mount adapter with the camera's lens
mark Insert, then turn in the direction of the arrow to mount.
2. Line up the mark on the lens (red)
adapter , then turn in the direction of the arrow to mount.
<Removing>
1. To remove the lens, slide the mount adapter's release button
then turn the lens counterclockwise
2. To remove the mount adapter, turn it counterclockwise while pressing the
camera's lens release button.
102
7:29 PM Page 102
5
6
with the lens mount mark on the
, hold it there,
and remove it.
6. Contax Flexible case C-9
By extending or contracting the tip of
the case, the NX can be placed in the
case with the Data back D-11 and the
following Carl Zeiss T* lenses mounted
(645 mount lenses require the NAM-1
mount adapter).
Lenses (with one filter, lens cap, and hood (reversed))
Case Tip N mount lens
VS28-80/3.5-5.6
Contracted
P50/1.4
C-9 VS70-200/3.5-4.5
VS24-85/3.5-4.5
Extended
VS17-35/2.8*
(* without hood)
* Use the C-8 flexible case (for the N1) when the MS100/2.8, VS70-300/4.0-5. 6, and 645
mount lens AMP 120/4, D45/2.8, D3.5/3.5 (* without hood) lenses are fitted.
645 mount lens
P80/2
S140/2.8
D55/3.5
103