Custom Functions; List Of Custom Functions - Contax NX Instruction Manual

11-1BC(E)_P086-89 11/15/01 7:29 PM

CUSTOM FUNCTIONS

The functions of this camera can be customized to match your shooting style.
As you work with this camera you will develop your own personal approach.
86
Page 86

1. List of custom functions

This camera is equipped with the 20 custom functions, shown on the table
below. When the camera is first purchased, these are all set to the stan-
dard or "default" functions (standard setting number "0"). (Note that all the
explanations in this manual assume the detail numbers are set to "0"). To
change the custom functions, refer to "Setting custom functions" (page 89).
• When the custom functions are set, the camera's functions and operating procedures
change. Read this section carefully and be sure to use these features to your best advan-
tage.
<List of Custom Functions>
Detail number
Standard set- Changed set-
ting (0) ting (1)
Function number
Power hold time
• Illumination time 16 sec. 12 sec.
also changed.
AE lock by half-
No AE lock AE lock on
pressing the shut-
ter button
Shutter time set-
1 Tv 1/2 Tv
ting step
Exposure compen-
1/3 EV 1/2 EV
sation step
Exposure com- Difference to the
Evaluative meter-
pensation center divided
ing display
value partial metering
Standard → Over → stan-
ABC Exposure
over → under dard → under
order
LIGHT button +
AF target setting
Focus frame
focus frame
select lever
select lever
AF supplementary
On
light
On
AF focus beep
Superimpose
On
when shutter but-
ton half-pressed
Changed set- Changed set-
ting (2) ting (3)
8 sec. 4 sec.
Difference to
center-weighted
average metering
Off
Off
Off
87