Table of Contents
Advertisement
11
1. GENERAL SAFETY INSTRUCTIONS FOR POWER TOOLS
IMPORTANT! When using electrical tools, the following safety instructions should be observed
to prevent the risk of electric shock, personal injury and fire. Read and observe these instructions
carefully before using the tool.
1. Keep work area clean.Cluttered areas and benches invite injuries.
2. Consider work area environment. Do not expose power tools to rain. Do not use power tools in
damp or wet locations. Keep work area well lit. Do not use power tools near flammable liquids or
gases.
3. Guard against electric shock. Prevent body contact with grounded surfaces (e.g. pipes, radiators,
ranges, refrigerators etc.)
4. Keep children away. Do not let visitors contact tool or extension cord. All visitors should be kept
away from work area.
5. Store idle tools. When not in use, tools should be stored in a dry, high or locked-up place, out of
the reach of children.
6. Do not force tool. It will do a better job and operate more safety at the rate for which it was intended.
7. Use right tool. Do not force small tools or attachments to do the job of a heavy duty tool. Do not
use tools for other than their intended purpose; for example do not use a circular saw for cutting tree
limbs or logs.
8. Dress properly. Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber
gloves and non-skid footwear are recommended when working outdoors. Wear protection hair
covering to contain long hair.
9. Use safety glasses. Also use a dust mask during pulverulent operations and wear ear protection.
If the noise level exceeds 85 dB (A), ear protection is obligatory. Indicated noise levels many be
exceeded dependent on the working environment and the material to be treated.
10. Use dust extraction. If dust extraction and collection devices are present on the tool, make sure
that they will be used properly.
11. Do not abuse cord. Never carry tool by cord or yank it to disconnect it from wall outlet. Keep cord
from heat, oil and sharp edges.
12. Secure work. Use clamps or a vise to hold the workpiece. It is safer and it frees both hands to
operatetool.
13. Do not overreach. Keep proper footing and balance at all times.
14. Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tools cords periodically and, if damaged,
have them repaired by an authorized service facility. Inspect extension cords periodically and replace
if damaged. Keep handles dry, clean and free from oil and grease.
15. Disconnect tools. When not in use, before servicing, and when changing accessories such as
blades, bits and cutters.
16. Remove adjusting keys and wrenches. Form the habit of checking to see that keys and adjusting
wrenches are removed from the tool before switching it on.
17. Avoid unintentional starting. Do not carry plugged-in tools with finger on switch. Be sure that the
tool is switched off before plugging in.
18. Outdoor use extension cords. When tools is used outdoors, use only extension cords intended for
use outdoors and so marked.
19. Stay alert. Watch what you are doing. Use common sense. Do not operate tools when you are
tired.
20. Check damaged parts. Before further use of the tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A guard or other part that is damaged should be properly
repaired or replaced by an authorized service center unless otherwise indicated elsewhere in the
instruction manual. Do not use tool if switch does not turn it on and off.
21. Warning. The use of any other accessory or attachment other than recommended in the instruction
manual may present a risk of personal injury.
22. Have your tool replaced by an expert. This electric appliance is built in accordance with the
relevant safety rules.
Advertisement
Table of Contents
