Advertisement
Page 4 • JL Audio, Inc., 2019
S T E P 9
Remove the trim ring from the MM50.
S T E P 10
With the smaller hole to the top, pass all wiring
and cables of the MM50 through the Dash Kit,
as shown. Slide the MM50 back until flush with
the Dash Kit flange.
S T E P 11
Align the holes of the MM50 mounting flange
with the holes in the Dash Kit flange.
Pass a #8 x 3/4" Stainless Steel Phillips Pan Head
Screw through each of the holes in the MM50
mounting flange, thread into the holes in the
Dash Kit flange, and fully tighten.
S T E P 12
Slide the factory U-Nut removed from Step 6
over the upper hole in the back of the Dash Kit,
as shown.
SBA-POL-RZG2-DK-MM50 INSTR_SKU# 011541
S T E P 13
Reinstall the trim ring onto the MM50.
S T E P 14
Pass all wiring and cables of the MM50 through
the opening in the lower dash panel. Push the
Dash Kit into the panel until it snaps into place.
Reinstall the dash light. Reinstall the Torx bolt
removed in Step 4 through the factory U-Nut
installed in Step 12. Reinstall the upper dash
panel and Torx bolts, and the front cover.
C O N G R AT U L AT I O N S !
You have completed the installation for this
model! Enjoy your new Stealthbox® Accessory!
(954) 443-1100
All specifications are subject to change without notice. "JL Audio®" and "How we play®" are registered trademarks of JL Audio, Inc. "Ahead of the Curve" and its respective logo are trademarks
of JL Audio, Inc.
Printed in USA • ©2019 JL Audio, Inc. • For more detailed information please visit us online at www.jlaudio.com.
JLA-SKU# 011541 • ver. 06.12.2019 • 10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA
*011541*
®
w w w . j l a u d i o . c o m
Advertisement
