Advertisement
Page 3 • JL Audio, Inc., 2019
S T E P 1
NOTE: This manual illustrates the
installation of the Dash Kit in a 2014-2018
model vehicle. The installation procedure is
the same for 2019-Up models.
Turn the front cover latches and unclip the
cover.
S T E P 2
Remove the front cover from the vehicle.
Remove the indicated Torx bolts from front of
the upper dash panel.
S T E P 3
Carefully unclip the upper dash panel by
pulling toward the rear of the vehicle.
S T E P 4
Remove the indicated Torx bolt from behind
the lower dash panel.
SBA-POL-RZG2-DK-MM50 INSTR_SKU# 011541
S T E P 5
Unclip and remove the dash light from the
lower dash panel.
S T E P 6
Remove the indicated U-nut from the lower
dash panel.
S T E P 7
Unclip the lower dash panel, and remove the
panel from the vehicle.
S T E P 8
Bottom View
Note the two indicated outer tabs on the
bottom of the Dash Kit.
For 2014-2018 model vehicles: Leave the tabs
in place.
For 2019-Up model vehicles: Use a pair of
pliers to break off the tabs.
Advertisement
