Advertisement
Single Group Transmitter
(14 channels)
02
LCD SCREEN
UP
STOP
DOWN
CHANNEL
CHANNEL+
For Single Group Setting
To select Number of Channels (if less than 14)
0 0
Step 1. Press and hold
both up & down buttons
for 3 seconds until
00 Channel displays.
Release the
buttons and the 00 will
start to flash.
Switching between Single Group & Multi-Group
Press and hold UP & DOWN
button then press and hold
LIMIT for 5 seconds. Group
number will display for
Multi-Group.
Lithium Rechargeable Battery Remote
®
Multi-Group Transmitter
02
LCD SCREEN
UP
STOP
DOWN
CHANNEL
CHANNEL+
0 1
Step 2. Press the up or down
button to select the required
number of channels
(between 1 - 14).
02
Instructions - 1100 Series
R1722 - 14/42 Channel Remote Control
(3 x 14 channels)
1 4
02
LIMIT
Single Group / Multi-Group
LCD Screen Illustration
Group No.
LIMIT
CONFIRM
Remote is for use for
up to 42 blinds.
01
Step 3. Press and hold
Channel + and Channel - at
the same time for 3 seconds
to confirm selection, No 01
will appear.
02
Group No.
Channel No.
02
Channel No.
Advertisement
Table of Contents
Related Manuals for Louvolite 1100 Series
Summary of Contents for Louvolite 1100 Series
- Page 1 Lithium Rechargeable Battery Remote Instructions - 1100 Series ® R1722 - 14/42 Channel Remote Control Single Group / Multi-Group LCD Screen Illustration Single Group Transmitter Multi-Group Transmitter (14 channels) (3 x 14 channels) LCD SCREEN LCD SCREEN Group No. Channel No.
- Page 2 Multi-Group Setting Two-Group Setting Repeat steps 1 & 2 for Group 1 Channel Selection. Skip step 3. 4. Press Channel + to 5. Press the UP or DOWN button 6. If you only need 2 groups enter second group num- to select the required number of press and hold Channel + ber of channels.
Need help?
Do you have a question about the 1100 Series and is the answer not in the manual?
Questions and answers