Louvolite 1100 Series Instructions

Operation Step Operation
Technical
Battery Specification: Li-ion Batter, 2000mAH, 7.4V.
data
Motor Torque/Speed: 1.1Nm/25rpm
General Information
Setup the
Illustration shows the side of motor head with SETTING
motor
button facing you.
• Motor antenna should be as straight as possible;
otherwise, the receiving distance will be reduced.
A. Remove grease
protector ring by
opening the split
ring and sliding off
the motor body
Motor
1
assembly
C. Fit the drive
using the circlip to
secure in position
Hold down the
SETTING button
1
on the motor
mount
Please release this
Pairing
2 button when the
remote
motor jogs
transmitter
with motor
Select channel for
blind and press the
CONFIRM button
3
on the remote
within 10 seconds
Press UP button
1
Changing
motor
Hold down LIMIT
rotation
button and then
direction
press STOP button
2
on the remote
transmitter
®
Result
B. Fit Crown by opening the
split ring and slide along the
motor body until it meets
the motor head
D. Attached motor plate
with the screws supplied in
either left hand or right hand
orientation as required
Motor jogs 2 times
Motor jogs 2 times. Remote
has now been paired with
the motor
If blind goes up the motor
direction is ok. If the blind
goes down then the motor
direction should be changed
Hold both buttons until
motor jogs - at this moment
the motor rotation direction
has been changed
Lithium Rechargeable Battery Motor
Illustration
Remote
Transmitter
Motor
Remote
Transmitter
1
Press and hold
3
Instructions - 1100 Series
R1710 - Battery Motor
R1720 - 5 Channel Remote Control
Motor
Release it
2
1
2
Issue: 1/15