Zoom G6 Quick Manual page 9

Using the looper while playing
Played phrases can be recorded to create stereo loops up to 45 seconds long.
1.
Press repeatedly to select
G6
This puts the
2.
Use the looper.
This shows the looper status.
• READY: No loop recorded yet
• REC: Now recording
• PLAY: Playing back
• STOP: Playback stopped
• CLEAR: Loop cleared
• OVERDUB: Now overdubbing
• UNDO: Last recorded overdub erased
• REDO: Overdub erased by UNDO restored
HINT
Using an SD card, loops can be recorded for
longer times and saved. Moreover, loops
on the SD card can be recalled for playback
and overdubbing.
into LOOPER mode.
Press when stopped
This starts recording. If a loop has
already been recorded, it starts playing
back.
Press when recording
Recording stops and the loop plays back.
Press when playing back
This starts overdubbing (recording on
top of) the playing loop.
Press when recording
This cancels recording.
Press when playing back
This stops playback.
This erases the last overdub (UNDO).
Press again to restore the erased overdub (REDO).
This deletes the loop.
.
Set the recording time.
• MANUAL: Press
• ♩ ×1–64: Set the recording time in quarter notes.
9
1
Touchscreen
Touch to open the looper set-
tings screen.
The mono/stereo setting, the
stopping method and the looper
position can be set.
Adjust the looper volume.
to stop recording.
2