Preparing For Use; First Start Up - Kruger KGV9000 Use And Maintenance Manual

Industrial steel steam cleaner (380 v) with external vacuum cleaner; detergent, hot water injection function and digital display

Table of Contents

Available languages

Please note: This manual is the complete list of all the accessories, some of which may not

have been included in the standard set of machine.

4.3 PREPARING FOR USE

Before using the machine, you need to perform some simple steps, which are listed below:

Vacuum cleaner support (14): place it on the bottom of the machine, taking care to make it

pass between the machine itself and the axis of the wheels; then use the screwdriver and the

four screws to fix (27).

Vacuum cleaner (15): place it on the vacuum cleaner support (14). Connect the suction nozzle

by a slight pressure until you hear the "click" sound. Then connect the power cord to the

socket (21) on the back of the machine and press ON / OFF switch of the vacuum cleaner

located on the head of the vacuum cleaner itself.

Push handle (16): insert the handle in its place at the back of the machine, then secure it by

tightening the four screws (20) you find in machine's packaging. On it you can place the

bucket (17) to hold accessories or other items.

Tanks: the machine has three separate tanks, closed by a pressure cap; before starting

the machine it is necessary to fill them as follows:

Water tank (10): tank with a capacity of 8 liters, in which you must put water.

CAUTION: the filling into this tank of liquids different from water could compromise the correct

operation of the machine.

Detergent tank (8): tank with a capacity of 5 liters, in which you must put detergent mixed with

water, as specified on the product label.

CAUTION: use only detergent recommended by the manufacturer, so as not to cause damage to

the machine and the user.

Anti-limestone tank (9): tank with a capacity of 1 liter in which you must put undiluted anti-

limestone product. The product will be taken from the tank automatically, to be then mixed with

water in the pipes.

CAUTION: use only the anti-limestone product recommended by the manufacturer, so as not to

cause damage to the machine and the user.

Once the machine has been set, connect the main plug (23) to the outlet of a suitable facility (see

"Technical specifications"), then start the unit by turning the main switch (1) on the "I" position.

Once the machine is switched on, the electronics controls all the necessary levels (tanks and

boiler).

In the case the water tank is found to be empty, an alarm is shown on the display to tell the user

10-

Table of Contents