Operation - Haussmann Xpert PT110912 Operator's Manual

Table of Contents

Advertisement

Available languages

Available languages

ASSEMBLY
2. Charging
!
CAUTION: To charge your battery, use only the charger supplied with your tool.
Do not use any other charger.
Note:
a) The battery charger is designed for charging the batteries of this
b) When you charge a new battery pack or a battery pack which has not been
c) If you charge a battery pack from a just operated tool or a battery pack which
d) If the charging light flashes in red, a problem exists and charging is not
Battery Charging
To charge your tool`s battery,use only charger and battery pack(model:B0P-SP17-
14;B0P-SP17-18) provided with your tool. Using other batteries can lead
to injuries and pose a fire hazard. Details as per battery charger manual.

OPERATION

Switch action
CAUTION: Before inserting the battery pack into the tool, always check to see
!
that the variable speed switch (5) actuates properly and returns to the "OFF"
position.
To prevent the variable speed switch (5) from accidentally pulled, a lock-off button
(6) is provided.
To start the tool, press in the lock-off button (6) and pull the variable speed switch
(5). The lock-off button (6) can be pressed in from either left or right side of the tool.
(Fig.C).
Adjusting the Speed
The speed of the switched on power tool can be adjusted, depending on how far
the variable speed (5) is pressed.
Light pressure on the variable speed switch (5) results in a low speed. Further
pressure on the switch increases the speed.
HAUSSMANN XPERT tool only. Never use it for other purposes or for charging
any batteries other than the batteries supplied with this tool.
used for a long period of time, it may not accept a full charge. This is a normal
condition and does not indicate a problem. You can recharge the battery pack
fully after discharging it completely and recharging a couple of times.
has been left in a location exposed to direct sunlight or heat for a long time,
the charging light may flashing in red. If this occurs, wait for a while. Charging
will begin after the battery pack cools. The battery pack will cool faster if you
remove the battery pack from the high capacity battery charger.
possible. The terminals on the charger or battery pack are clogged with dust or
the battery pack is worn out or damaged.
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

59595047

Table of Contents