A Typical Wash Programme - Creda W100FW Instruction Book

A typical wash programme

Before selecting any programme ensure the mains button is in the 'off' position.
1. Sort laundry into same wash requirements.
4. Select wash programme by turning
the wash dial clockwise.
7. Check water and electricity are switched
on at mains.
We recommend, on completion of your wash programme that you switch 'Off' both the the electricity and water supply to the appliance.
6
All manuals and user guides at all-guides.com
2. Close door, applying pressure only at
the 2 o'clock position.
5. Select optional wash features by pressing
required button.
8. Press the Power button to Start the
programme. After a few seconds the Door
Locked indicator will illuminate.
3. Add detergent/ conditioner
(See manufacturer's instructions).
6. Select reduced spin (Model W120VW
only), if required, by turning the control
dial.
9. Approximately 1-2 minutes after the pro-
gramme has finished the indicator light will
go out and the door can be opened. Press the
Power button to 'OFF' .