Creda Simplicity 1000 Instruction Book
Hide thumbs
Also See for Simplicity 1000:
- Manual (10 pages) ,
- Instructions manual (8 pages) ,
- Instruction book (20 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Need help?
Do you have a question about the Simplicity 1000 and is the answer not in the manual?
Questions and answers
How do I access and clean the filter on my Creda 1000
The Creda Simplicity 1000 does not have a separate filter. To access and clean any blockage, you need to take off the back panel and strip down the pump.
This answer is automatically generated
How do you empty the tray that collects coins or bits gone into the collection point of creda when water is draining
To empty the coin collection tray on a Creda Simplicity 1000 washing machine:
1. Locate the coin trap – It is usually found behind a small access panel at the bottom front of the machine.
2. Open the access panel – Use a flathead screwdriver or gently pull it open, depending on the model.
3. Place a towel or shallow container – Some water may spill out when opening the tray.
4. Unscrew or pull out the coin trap cover – Turn it counterclockwise or pull gently to remove.
5. Remove debris and coins – Take out any objects collected in the tray.
6. Clean the area if needed – Wipe any lint or residue.
7. Reinsert the tray and close the panel – Secure everything back in place.
Always unplug the machine before starting for safety.
This answer is automatically generated