Cisco Business 350 Series Manual page 2
Configure stack settings through the command line interface (cli)
Hide thumbs
Also See for Business 350 Series:
- Administration manual (762 pages) ,
- Hardware installation manual (96 pages) ,
- Quick start manual (61 pages)
Advertisement
Connect the Switches
Step 1
Determine the stack mode that you would want to configure. The options are:
Chain - Each unit is connected to the neighboring unit, but there is no cable connection
between the first and last unit. This is the default stack mode. The image below shows a chain
topology of a four-unit stack:
Ring - Each unit is connected to the neighboring unit. The last unit is connected to the first
unit. The image below shows a ring topology of a four-unit stack:
Advertisement
