Installation; Troubleshooting - Home DHM 300 Instruction Manual

Caution: Risk of electric shock!
Do not attempt to disassemble or modify the unit or its accessories. In case any part is damaged,
immediately power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced with cables
obtained from the manufacturer or its service facility.

INSTALLATION

1. Remove the packaging carefully taking care not to damage the plastic body with scissors or knife.
2. Make sure the appliance has not been damaged in transit!
3. Place the appliance only onto a stable and horizontal surface!
4. Always keep the minimum installation distances indicated in Figure 2. Always observe the health and safety
regulations valid in the country of use!
5. Connect the power adapter to the appliance!
6. Connect the power adapter to 230 V~ / 50 Hz electric wall outlet.
7. After connecting the unit to power source, it is ready for operation.
CLEANING
In order to ensure optimum functioning, the unit may require cleaning at least once a month, depending on the man-
ner of use and degree of contamination.
1. Switch off and power off the unit by unplugging it from the electric outlet before cleaning!
2. Use a slightly moistened cloth to clean the unit's exterior. Do not use any aggressive cleaners. Avoid getting water
inside of and on the electric components of the appliance!
3. Reinstall the appliance!

TROUBLESHOOTING

Malfunction
Device doesn't switch on.
Device does not collect vapour.
DISPOSAL
Waste equipment must be collected and disposed separately from household waste because it may con-
tain components hazardous to the environment or health. Used or waste equipment may be dropped
off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and
function. Dispose of the product at a facility specializing in the collection of electronic waste. By doing so, you
will protect the environment as well as the health of others and yourself. If you have any questions, contact
the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as
prescribed in the relevant regulations and shall bear any associated costs arising.
Possible solution
Check the power supply!
Check the switch!
Check the location of the appliance (Figure 2.)!
Air might not humid enough.
4