View current measured values of HMG 3010 in HMGWIN 3000 ........9 Retrieving a Measurement Curve ..................9 4.2.1 Retrieving (and deleting) a file from HMG 3010 in HMGWIN 3000 ..........9 4.2.2 Opening a measurement curve already saved on the PC ..............10 4.2.3...
In the event of faults or if anything is unclear, please contact your nearest HYDAC repre- sentative. Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
(recommended 1024x768, 65536 colours) 3.2 USB Driver Installation If the HMG 3010 is being connected with the PC for the first time, first, please install the HYDAC USB driver „CP210x_VCP_Win_XX.exe“. The driver is included on the CD-ROM contained in the scope of delivery.
German, English or French. To do this, select the language by mouse click. Confirm the setting by clicking the "OK" button. 3.5 Setting up Connection with HMG 3010 • To establish a connection with a HMG device connected to the PC, click on the "Units"...
SIDEX PC-Software HMGWIN 3000 Page 8 3.5.1 Communication error If no connection should be possible to your HMG 3010, this could have the following rea- sons: Error cause at HMG 3010 • • Check if HMG 3010 is switched on and if "USB" has been selected when con- necting the USB under „Settings“, „Change basic settings“, „PC connection“.
■ A new window for "HMG 3000 Manager" opens. ■ Click on "Display measured values" on the left side of the window. ■ The measured values of all active channels of HMG 3010 appear on the right side of the window.
■ A new window for "HMG 3000 Manager" opens. ■ Click on "Recordings" on the left side of the window. ■ All of the recordings stored in the HMG 3010 are shown on the left. ■ Select one or more recordings from the list.
■ By clicking on another point in the graph with the ruler. Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
• Pull the double line apart as far as the second time point for which you wish to know the measured values. Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
“Scaled“ at the bottom of the screen. • The scale settings selected (see section 4.4.10) are applied to the current recording. Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
• Using the "handle", click on the approximate position you would like to insert a remark. • A Remark window opens. It is subdivided into three parts: text, style and anchor. Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
Page 15
To edit the remark text or manually enter another "anchor time", click on the 3 handles in the lower right corner. The remark box opens again. Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
• Click on “Delete“ in the bar beneath this window to delete the blue-highlighted remark. • Click on “OK“ to close the window with the remarks list. Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
You can do this as many times as there are changes to redo. Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
• This reference record then acts as a display/indication default for other recordings when opening other records relating to type of curve, type of line, colours, etc. Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
• To overlay the curves click on “Finish“ in the bar at the bottom of the window. • Click on “Cancel“ to cancel the overlay. Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
• Click on "Open" to import the file. • Click on “Cancel“ to cancel the action. Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
Click on button next to input box. ■ A window opens enabling you to browse for the folder. ■ Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
“Close all“ in the dropdown menu, or click on “Close all“ at the bottom left of the window. • If you have not saved your recordings, you are prompted to do so. Status: 2012/09/20 Part No. 669847 HYDAC ELECTRONIC GMBH Sidex Suministros, S.L. Polígono Industrial El Tiro, s/n. 30100 Murcia. Teléfono: 968 306 000. E-mail: info@sidex.es...
From your PC you can display and administrate the current measured values from your HMG 3010. In addition, you can edit the sensor settings, trigger settings, redordings set- tings, default measuring units and display settings. You have different options to save the settings or to retreive saved settins.
Page 26
There are two options of saving the changed settings, either in HMG 3010 or on your PC. − To save the settings in a file to be stored in HMG 3010, select "Save in HMG". Now, you can enter a name. In HMG 3010, you will now find this name in the menu "Manage settings".
Page 27
• Click on “Start recording”. Except the "Recorded data" menu item, in the following, you will find the same setting options as in the HMG 3010 device itself. Details can be found in the HMG 3010 man- ual, see section "Start recordings".
4.7.3 Extras You have the option of updating the HMGWIN 3000 firmware for your HMG. 4.7.3.1 Update for HMG 3010 • Click on the "Units" dialogue box and select "HMG3000 Manager" from the drop- down menu.
• Now select the folder in which the update file is saved. The most recent firmware ver- sion can be found on the CD contained in the scope of delivery of the HMG 3010. The firmware is located in the "Installation" directory.
Need help?
Do you have a question about the HMG 3010 and is the answer not in the manual?
Questions and answers