Veikong VFD500 User Manual page 9

【UP/DOWN/SHIFT】
ESC ENTER
【UP/DOWN/SHIFT】 【UP/DOWN/SHIFT】 【UP/DOWN/SHIFT】
Note:
1)Dual-line monitoring cannot monitor "32-bit data" and "binary data".
2)In the monitoring state of the second line, rotate "UP and DOWN" to set the
frequency or torque in real time. For details, see function code P21.13 (the default
factory setting is P00.07, and the rotary knob will take effect immediately after the
change).
4. digital tube display
◆ Display of decimal data
16 digits:
The display range for unsigned numbers is 0 to 65535 (excluding the decimal point),
the display range for signed numbers is -9999 to 32767 (excluding the decimal point),
and negative numbers less than -9999 will be displayed as -9999.
Function code
selection
status
【UP/DOWN/SHIFT】 【UP/DOWN/SHIFT】 【UP/DOWN/SHIFT】
parameter
Edit/View status
ESC ENTER
8
ESC ENTER
ESC ENTER
【UP/DOWN】