Brother DCP-T220 Quick Start Manual page 4

2 in 1 ID Copy
(DCP-T220 / DCP-T420W / DCP-T425W)
Check Ink Volume
Improve Print Quality
Clean the print head.
(DCP-T428W: Upload)
Press simultaneously
If the print quality does not improve with normal cleaning, try the Special cleaning (Note that this operation will consume a large amount of ink).
1. Make sure all ink tanks are at least half-full.
2. Use the procedure above, but hold Mono Start and Color Start simultaneously for five seconds while the Ink LED is blinking.
Remove Jammed Paper
For FAQs, Troubleshooting, and to download software and manuals, visit www.95105369.com.
Place in the
lower right
DO NOT fill the ink tank past the maximum fill mark.
When the ink level reaches the lower line, refill the ink tank as soon as possible.
Clean all colors
Clean black only
Blinking
Blinks slowly after scanning is complete
You can set one specific copy function for the Copy
Shortcut button (see the Online User's Guide). The
default is 2 in 1 ID Copy.
After cleaning, the machine prints the Print
Quality Check Sheet.
Good
Avoid getting ink on your
hands.
© 2020 Brother Industries, Ltd. All rights reserved.
Poor
1
2
2