Brother DCP-T220 Quick Start Manual page 3

Reference Guide
For detailed machine operation including scanning and
troubleshooting tips, see the Online User's Guide:
Control Panel Overview
1
8
7
6
5
Machine Settings
The machine's settings are set from the application (Brother iPrint&Scan or Brother Utilities) on your computer or mobile device.
Important Notice for Network Security:
recommend immediately changing the default password to protect your machine from unauthorized access. See the Online User's Guide.
LED Indications
Lit Blinking
• See Check Ink Volume in this guide. When finished, press Stop.
• No paper loaded: Load paper in the tray, and then press Mono Start or Color Start.
• Tray not detected: Slowly push the paper tray completely into the machine.
• Out of memory
Wi-Fi
(DCP-T420W/DCP-T425W/DCP-T428W)
Copy
Normal Copy
1. Load the paper in the paper tray.
2. Place the document in the lower right
corner of the scanner glass.
3. Press Mono Start or Color Start.
1 Power / Stop button
2
2 Power LED
3
4
3 Warning LED
4 Ink LED
Press to turn the machine on. Press and hold
The default password to manage this machine's settings is located on the back of the machine and marked "Pwd". We
• Standby
• Machine error
• Off
n Multiple Copy
Press Mono Start or Color Start once for each additional copy.
n Best Quality Copy
Press and hold Mono Start or Color Start for two seconds.
n Other Copy
Use the Brother iPrint&Scan application on a computer or mobile device. See the Online User's Guide.
www.95105369.com
5
6
7
8
to turn the machine off.
• Busy (blinking)
• Sleep (blinking slowly and faintly)
• Paper jam (blinking simultaneously): See Remove Jammed Paper in
this guide.
For solutions, see the Online User's Guide:
www.95105369.com
• Connecting
Using &
Troubleshooting
Color Start button
Mono Start button
• Copy Shortcut button
(DCP-T220/DCP-T420W/DCP-T425W)
• Upload button (DCP-T428W)
Wi-Fi button / LED
(DCP-T420W/DCP-T425W/DCP-T428W)
• Wrong paper size
• Connected