Siemens TQ507DF3 User Manual page 75

Empty and clean the drip tray.
4.
Insert the drip tray and close the
5.
door.
Restart the service programme.
6.
Using the milk system cleaning
programme
Rinse the milk system with water, if ne-
cessary. The rinsing process takes ap-
prox. 1 minute.
Press ⁠ .
1.
Use and
2.
and care" and press
Use and
3.
tem" and press
To start the programme, press
4.
a The display will guide you through
the programme.
Remove and empty the milk con-
5.
tainer.
Clean the milk container, milk tube
6.
and suction pipe.
Fit the components and insert the
7.
milk container.
Place an empty glass under the out-
8.
let system and press
The milk system will now clean itself
automatically.
a The program has ended and the ap-
pliance is ready for operation.
Tip: If you want to clean the milk sys-
tem particularly thoroughly, clean it reg-
ularly by hand.
→ "Cleaning the milk system", Page 72
Using the descaling programme
Run the descaling programme when
your appliance prompts you. The pro-
cess takes approx. 30 minutes.
Requirement: The brewing unit is
cleaned.
→ "Cleaning brewing unit", Page 73
Press ⁠ .
1.
Use and
2.
and care" and press
to select "Cleaning
⁠ .
to select "Milk sys-
⁠ .
⁠ .
to select "Cleaning
⁠ .
Use
3.
and press
To start the programme, press
4.
a The display will guide you through
the programme.
Empty and insert the drip tray.
5.
Remove and empty the milk con-
6.
tainer.
Clean the milk container, milk tube
7.
and suction pipe.
Fit the components and insert the
8.
milk container.
If there is a water filter, remove it.
9.
Press
10.
Empty the water tank.
11.
⁠ .
Fill a container with 0.5 l lukewarm
12.
water.
Add a Siemens descaling tablet to
13.
the water and stir until the tablet is
fully dissolved.
Pour the descaling solution into the
14.
water tank up to the calc mark and
press
Place the empty container under the
15.
outlet system and press
a The descaling programme will run
for approx. 20 minutes.
Rinse the water tank.
16.
Press
17.
If there is a water filter, insert the wa-
18.
ter filter.
→ "Insert water filter", Page 64
Press
19.
Fill the tank with fresh water up to
20.
the "max" mark.
Press
21.
a The descaling programme takes ap-
prox. 1 minute and rinses the appli-
ance.
Empty and insert the drip tray.
22.
Remove and empty the milk con-
23.
tainer.
Clean the milk container, milk tube
24.
and suction pipe.
Cleaning and servicing en
and to select "Descale"
⁠ .
⁠ .
⁠ .
⁠ .
⁠ .
⁠ .
⁠ .
⁠ .
75