Scag Power Equipment V-TIDE II SVRII-32A-16FX Operator's Manual page 24

R
1. Disengage the power to the cutter blades.
2. Pull the cutter deck lift lever all the way backward
until it locks in place. See Figure 4-6.
3. Insert the lanyard pin into the cutting height index
at the desired cutting height. Pull backward on the
cutter deck lift lever, push and hold the lock button
See Figure 4-6. Slowly release the cutter deck lift
lever. A deck height decal is located on the cutting
height index as an aid in adjusting the deck to the
desired height.
CUTTER DECK
LIFT LEVER
LANYARD PIN
Figure 4-6. Adjusting Cutting Height
20
Section 4