Table of Contents
Advertisement
WEB USER INTERFACE (WEBUI)
_______________________________________________________________________________________________________________
PTC - Time Source Configuration - NTP Option
•
The NTP option will expand the parameters to include the NTP parameters. These parameters are hidden until
the NTP option is selected. In the NTP Mode field, if Unicast is selected the PTC Console requests time
updates from a specific IP address: Primary NTP Time Source, or if that isn't available, the Backup NTP Time
Source. If the NTP Mode is set to Multicast, the PTC Console will subscribe to a multicast group and receive
time updates as they arrive, it will not request them.
Figure 4-16 PTC - Time Source Configuration - NTP Option Parameters
PTC - Preferred Time Source
•
The Preferred Time Source function can be enabled by the user to direct the PTC Console to a desired time
source.
SIG-00-13-12
Version No.: B
Figure 4-17 PTC - Preferred Time Source Enable
4-12
February 2021
Advertisement
Table of Contents
