Table of Contents
Advertisement
SYSTEM MANAGEMENT
_______________________________________________________________________________________________________________
A.6.2. Examples
The following will generate the complete text file of the configuration settings supported by the WIU. The text file
can be used as a reference for what variables are supported.
# wiuconf –g /tmp/wiu_conf.txt
The following is an example to view the PTC UCN (PTC Configuration CRC).
# wiuconf -d ptc_ucn
5e5ab213
The following is an example to set the encrypted HMAC key:
# wiuconf -s hmac_key –t ABC123XYZETC
A.6.3. Special Considerations
Some variables are nested depending on which port/channel/slot the setting applies to. For example, the
"Baud_Rate" variable depends on which serial port you are setting. The following lists the full variable names for
some variables nested this way:
laptop_serial_port:baud_rate
laptop_serial_port:Data_Bits
laptop_serial_port:Parity
laptop_serial_port:Stop_Bits
laptop_serial_port:Flow_Ctrl
Serial_Port1:baud_rate
Serial_Port1:Data_Bits
Serial_Port1:Parity
Serial_Port1:Stop_Bits
Serial_Port1:Flow_Ctrl
Serial_Port2:baud_rate
Serial_Port2:Data_Bits
Serial_Port2:Parity
Serial_Port2:Stop_Bits
Serial_Port2:Flow_Ctrl
Serial_Port3:baud_rate
Serial_Port3:Data_Bits
Serial_Port3:Parity
Serial_Port3:Stop_Bits
Serial_Port3:Flow_Ctrl
SIG-00-13-12
Version No.: B
A-8
February 2021
Advertisement
Table of Contents
