Table of Contents
Advertisement
_______________________________________________________________________________________________________________
3.2.2
Installing the PTC Console to the Rack Assembly
The PTC Console optional Mounting Bracket is designed to mount the console between the relay rack rails.
Mount the console using the following procedure:
1. Align the Mounting Bracket with the Relay Rack rails.
2. Use ¼-20 bolts and flat washers and slide through the holes in the mounting bracket and the rack rail.
3. Secure the bolts using a flat washer, a lock washer, and a ¼-20 nut.
Figure 3-7 Mounting the PTC Console to a Rack Assembly
SIG-00-13-12
Version No.: B
3-7
INSTALLATION AND CONFIGURATION
February 2021
Advertisement
Table of Contents
