Table of Contents
Advertisement
Quick Links
Operating instructions
Hinge safety switch
Operating instructions. . . . . . . . . . . .pages 1 to 10
EN
Translation of the original operating instructions
Content
1
1.1 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.2 Target group: authorised qualiied personnel. . . . . . . . . . . . . . . . . .1
1.3 Explanation of the symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.4 Appropriate use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.5 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.6 Warning about misuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.7 Exclusion of liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
2.1 Ordering code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.2 Special versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.3 Destination and use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.4 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2.5 Safety classiication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3
3.1 General mounting instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3.2 Adjustment and inspection of the switching angle . . . . . . . . . . . . . .4
3.3 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
4
4.1 General information for electrical connection. . . . . . . . . . . . . . . . . .5
4.2 Contact variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
4.3 Switch travel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
5
5.1 Functional testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
5.2 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
6
6.1 Disassembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
6.2 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
7
7.1 Wiring coniguration and connector accessories . . . . . . . . . . . . . . .6
7.2 Door gap calculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
7.3 Load speciications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
7.4 EC Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
1. About this document
1.1 Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety switchgear. The operating inst-
ructions must be available in a legible condition and a complete version
in the vicinity of the device.
1.2 Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only.
Please make sure that you have read and understood these operating
instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation.
The machine builder must carefully select the harmonised standards to
be complied with as well as other technical specifications for the selec-
tion, mounting and integration of the components.
1.3 Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional information.
Caution: Failure to comply with this warning notice could
lead to failures or malfunctions.
Warning: Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine.
1.4 Appropriate use
The products described in these operating instructions are developed to
execute safety-related functions as part of an entire plant or machine. It
is the responsibility of the manufacturer of a machine or plant to ensure
the correct functionality of the entire machinery or plant.
The safety switchgear must be exclusively used in accordance with the
versions listed below or for the applications authorised by the manufac-
turer. Detailed information regarding the range of applications can be
found in the chapter "Product description".
1.5 General safety instructions
The user must observe the safety instructions in this operating instruc-
tions manual, the country-specific installation standards as well as all
prevailing safety regulations and accident prevention rules.
Further technical information can be found in the Schmersal
catalogues or in the online catalogue on the Internet:
www.schmersal.net.
The information contained in this operating instructions manual is provi-
ded without liability and is subject to technical modifications.
There are no residual risks, provided that the safety instructions as well
as the instructions regarding mounting, commissioning, operation and
maintenance are observed.
EN
TESK
1
Advertisement
Table of Contents
Related Manuals for schmersal TESK-S Series
Summary of Contents for schmersal TESK-S Series
-
Page 1: Table Of Contents
4.2 Contact variants ........5 Further technical information can be found in the Schmersal 4.3 Switch travel. -
Page 2: Warning About Misuse
Operating instructions Hinge safety switch TESK 1.6 Warning about misuse 2.4 Technical data Standards: IEC 60947-5-1; EN ISO 13849-1; In case of improper use or manipulation of the safety switch- EN 14119; BG-GS-ET-15 gear, personal hazards or damages to machinery or plant Enclosure: Zinc diecast, enclosure cover components cannot be excluded. -
Page 3: Safety Classiication
Operating instructions Hinge safety switch TESK The hinge switch furthermore must be pinned after assembly and adjustment (Fig. 3). Fig. 1 2.5 Safety classification Fig. 3 Standards: EN ISO 13849-1 (NC contact): 2.000.000 Legend: (NO contact) at 10% ohmic contact load: 1.000.000 A = Drill and pin in this area Service life:... -
Page 4: Adjustment And Inspection Of The Switching Angle
Operating instructions Hinge safety switch TESK 3.2 Adjustment and inspection of the switching angle 3.3 Dimensions After the switch has been fitted, the switching function and the opening All measurements in mm. angle of the safety guard must be checked. The switching angle of the NC contacts set in factory is approximately 3°. -
Page 5: Electrical Connection
Operating instructions Hinge safety switch TESK TESK-…ST… TESK-…22ST… TESK-…13ST… 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 TESK-…L… TESK-…12ST… TESK-…02ST… 1 2 3 4 5 6 7 8 1 2 3 4 5 TESK-…11ST…... -
Page 6: Set-Up And Maintenance
Connector plug ST M12, 5-pole the connector conductor numbering available connectors of the below-mentioned Schmersal connectors to EN 60947-5-2: 2007 DIN 47100 Connecting cables with female connector IP67, M12, 5-pole - 5 x 0.25 mm² Part number... -
Page 7: Door Gap Calculation
Operating instructions Hinge safety switch TESK β = Door opening angle 7.2 Door gap calculation Calculation of the door gap depending on the opening angle, C = Door width in mm door width and overlapping D is the door gap in mm with an overlap at B = 0 mm. B is the thickness of the door β... - Page 8 Operating instructions Hinge safety switch TESK Doors with two hinges B [mm] Force [N] 1000 1100 1200 up to 1000 up to 1800 H [mm] up to 2400 up to 2600 not recommended Doors with three hinges B [mm] Force [N] 1000 1100 1200...
-
Page 9: Ec Declaration Of Conformity
Hinge safety switch TESK Appendix 7.4 EC Declaration of conformity EC Declaration of conformity Translation K. A. Schmersal GmbH & Co. KG of the original Declaration of Conformity Industrielle Sicherheitsschaltsysteme Möddinghofe 30, 42279 Wuppertal Germany Internet: www.schmersal.com We hereby certify that the hereafter described safety components both in its basic design and const- ruction conform to the applicable European Directives. - Page 10 K. A. Schmersal GmbH & Co. KG Industrielle Sicherheitsschaltsysteme Möddinghofe 30, D - 42279 Wuppertal Postfach 24 02 63, D - 42232 Wuppertal Phone: +49 - (0)2 02 - 64 74 - 0 Telefax +49 - (0)2 02 - 64 74 - 1 00 E-Mail: info@schmersal.com...
Need help?
Do you have a question about the TESK-S Series and is the answer not in the manual?
Questions and answers