Ironing Chart - Electrolux Refine 700 Instruction Book

CLEANING (DO NOT USE ANY DETERGENT)
13 Flush Clean (K). Fill the tank with water to max level (M) and select "Linen" programme. When headlight
flashes, unplug the iron. Hold the iron over a sink, press the Flush Clean button (K). Use a full tank of
water. Release button to stop Flush Clean function. Repeat the procedure if necessary.
NOTE: DO NOT USE ANY DESCALING FLUID, VINEGAR OR CITRUS ACID!
14 Soft Water Activator (L) is recommended right after Flush Clean. Open water filling cover (P) and
pull the Soft Water Activator (L) out for disposal. Replace with new Water Softener System Electrolux
EDC03/900923064. Both Flush Clean & Water Softener System in combination ensure a clean, soft
steam for best ironing results and longer lifetime of your steam iron.
15 Cleaning the soleplate (N). To remove burnt residues, iron over a damp cloth while the iron is still hot.
To keep the soleplate smooth, avoid contact with metal objects. Never use scouring pads or harsh
cleaners as they may damage the surface.
HOT SOLEPLATE INDICATOR (A)
16 Your appliance is equipped with hot soleplate indicator ThermoSafe™ which detects when the sole-
plate is hot by changing its colour from black to red.
Note! During heat-up time, the soleplate might be hot even though the sticker didn't turn red. Once
the temperature of the soleplate is < 40°C, the colour changes back to black showing the iron is
ready to be stored away.

IRONING CHART

FABRIC
Acrylic
Acetate
Nylon & Polyester
Rayon
Viscose
Silk
Cotton blends
Water-repellent
breathable fabrics
(excluding PVC-
coatings)
Wool & Wool blends
Cotton
Corduroy
Linen
www.electrolux.com
TEMPERATURE SET-
TING
Outdoor / Delicate
Outdoor / Delicate
Outdoor / Delicate
Outdoor / Delicate
Outdoor / Delicate
Outdoor / Delicate
Outdoor / Delicate
Outdoor
Wool
Cotton
Cotton
Cotton or Linen
IRONING RECOMMENDATION
Dry iron inside out.
Dry iron inside out while still damp or use spray to
dampen.
Iron inside out while still damp or use spray to
dampen.
Iron inside out.
Iron inside out.
Iron inside out. Use an ironing cloth to prevent
shiny iron marks.
Check the label and follow the manufacturer's
instructions. Outdoor setting is recommended for
this kind of fiber.
Gently wash and air-dry your outdoor garments
according to their care label instructions. Carefully
and slowly dry iron the outside to reach all parts
of your garment in order to reactivate the DWR
(Durable Water Repellency) treatment and restore
the water repellency of your garment*. You can
use this setting after washing and air-drying your
outdoor garment or anytime you want to restore
the water repellency of certain areas of your
garment.
* Better than air drying only for water - repellent
outdoor garments
Iron inside out or use ironing cloth.
Dry iron while still damp or use spray to dampen.
Use maximum steam.
Steam iron inside out or use ironing cloth.
Iron inside out or use ironing cloth to prevent shiny
iron marks, especially with dark-colored fabrics.
Dry iron while still damp or use spray to dampen.
Use maximum steam.
EN
CNS
CNT
KR
ID
TH
VN
7