PC-S3000 — PART CIRCLE SPINNER
The Part Circle Spinner distributes
water to one side in an approximate
semicircle. It can be used to minimize
application on pivot towers or other
structures. The Part Circle Spinner
utilizes the 3TN nozzle of the conven-
tional S3000 spinner. The directional
control is provided by a 'stream
deflector' which is inserted between
the nozzle and the spinner body.
OPERATING SPECS:
10-20 PSI (.7-1.4 BAR),
•
#14-#40 3TN Nozzle,
•
Mount on a rigid drop
•
assembly
PC-D3000 — PART CIRCLE SPRAYHEAD
The Part Circle Sprayhead has a 170°
arc setting to provide part-circle
operation for applications at the span
towers or offset drops or boombacks.
The PC-D3000 spray plate provides
stream definition similar to the spray
plate geometry of the #9493 Blue
spray plate. The medium grooves
and concave trajectory provide wind-
penetration and wide throw distance.
OPERATING SPECS:
10-20 PSI (.7-1.4 BAR),
•
#9-#50 3TN Nozzle,
•
Mount on a rigid drop
•
assembly
Nelson Irrigation Corporation 848 Airport Road Walla Walla, WA 99362-2271 USA Tel: 509.525.7660 Fax: 509.525.7907 info@nelsonirrigation.com www.nelsonirrigation.com
Nelson Irrigation Corp. of Australia Pty Ltd 35 Sudbury Street Darra QLD 4074 Tel: +61 7 3715 8555 Fax: +61 7 3715 8666 info@nelsonirrigation.com.au www.nelsonirrigation.com.au
PART CIRCLE PIVOT SPRINKLERS
PERFORMANCE:
190° Arc (varies slightly with flowrate)
•
Gentle, Rainlike Droplets
•
High Uniformity
•
Low Instantaneous Rates
•
THROW RADII
:
(At midpoint of arc, throw to the sides may be less.)
15 PSI (1.0 BAR)
•
#36 3TN Nozzle
•
Stream Height = 13 in. (330 mm)
•
PERFORMANCE:
170° Arc (varies slightly with flowrate)
•
Low Trajectory
•
Concave Medium Groove
•
Blue Spray Plate
THROW RADII
:
(At midpoint of arc, throw to the sides may be less.)
10 PSI (.7 BAR)
•
#36 3TN Nozzle
•
Stream Height = 5 in. (127 mm)
•
PC-S3000/D3000