Page 1
Technical V1.0 22/07/2019 KB Configure the Yaesu FTM-400 for GB7MT Information 1) Please make sure that your callsign has been entered in your radio. If not, please refer the Operator Manual. 2) Enter the output frequency of GB7MT 439.6625MHz Make sure the radio is in VFO mode.
Page 2
Technical V1.0 22/07/2019 KB Configure the Yaesu FTM-400 for GB7MT Information Touch the numbers [4] [3] [9] [6] [6] [2] The Frequency 439.662 will be displayed on the screen. Press to hide the function menu. 3) Set the mode to C4FM.
Page 3
Technical V1.0 22/07/2019 KB Configure the Yaesu FTM-400 for GB7MT Information Turn to select [5 RPT SHIFT] Touch [5 RPT SHIFT] until – is displayed Turn to select [6 RPT SHIFT FREQ] Touch [6 RPT SHIFT FREQ] so that the current repeater shift frequency is highlighted in yellow.
Page 4
Technical V1.0 22/07/2019 KB Configure the Yaesu FTM-400 for GB7MT Information Press to save the data to memory. When the memory writing is completed the frequency and memory channel number will be shown in the display. Touch to toggle between VFO and Memory mode.