Intenna Cordless Telephone Troubleshooting Guide - Cobra Intenna CP-2506 Operating Instructions Manual

Cobra cp2506: operating instruction

Table of Contents

CP-2506.qx

11/12/97 12:35 PM

Cordless Telephone

Troubleshooting Guide

If your cordless phone does not seem to operate properly, please check the

following and refer to the appropriate sections in this booklet for detailed in-

formation:

The phone is dead; no indicator lights are on: Are the power cord

and telephone cord connected?

Handset beeps during conversations or when away from the base:

The batteries need recharging; return the handset to the base for

overnight recharging.

Hearing poor audio or added interference during calls: DonÕt

cover the top

phone on your shoulder. This blocks the special internal Cobra

Intenna handset antenna.

Handset disconnects, loses performance and/or beeps three times

when in use away from the base: You may be out of range or your

batteries may need recharging. Move closer to the base and/or re-

charge batteries.

Unable to make a call due to interference: Select a new channel.

Handset won't work after a power outage or after disconnecting

phone from AC power and then reconnecting it: Return the hand-

set to the base for about thirty seconds to automatically match the

security coding.

Handset seems "dead.": Battery power has run out; return handset

to base and charge for at least 12 hours. If handset still seems

"dead", unplug the handset battery for 15 seconds and plug back in.

Then place the handset back on the base for at least 5 minutes.

Memory dialing does not work: AC power has been disconnected;

you must re-enter your memory dialing numbers (see p. 10)

Page 16

section of the handset with your hand or rest the

Table of Contents