Handset Battery Disposal; Cleaning The Charging Contacts - Cobra Intenna CP-2505 Operating Instructions Manual

Cobra cp2505: operating instruction
Table of Contents

Advertisement

REPLACING THE HANDSET BATTERY (continued)
1. To remove the battery door, press
and slide downward.
2. Carefully disconnect the battery
pack and dispose of it properly.
See BATTERY DISPOSAL below.
3. To replace, observe connection
orientation and connect the new
battery and replace the door.
Return the handset to the base
and charge the battery overnight
(at least 12 hours).

HANDSET BATTERY DISPOSAL

The rechargeable nickel cadmium (NiCad) battery in this product must be
recycled or disposed of properly in compliance with all applicable laws.
Certain states or municipalities require recycling and have established collec-
tion programs. Please contact your local waste removal authority for instruc-
tions, or return to Cobra for recycling. Wrap batteries carefully and mail
postage prepaid to:
DO NOT PUT BATTERIES INTO
FIRE OR EXPOSE TO HIGH HEAT.
THEY MAY EXPLODE.

CLEANING THE CHARGING CONTACTS

Clean the two metal charging contacts on the base and handset with a soft,
dry cloth on a regular basis to ensure optimum performance of the battery-
charging system. Rubbing alcohol may be used if more thorough cleaning is
required.
2505.MANUAL.pm
Cobra Electronics Corporation
6500 W. Cortland Street
Chicago, IL 60707
Attn: Battery Recycling
13
14
"Contains Nickel-Cadmium
Rechargeable Battery. Must be
recycled or disposed of properly."
Ni-Cd
11/7/97, 11:43 AM

Advertisement

Table of Contents
loading

Table of Contents