Decisions You Must Make; Radio Equipment; Additional Items Required; Building Supplies And Tools - QUINN Skeeter 40 Instruction Manual

Decisions you must make

Motor Selection
There are several motors that will work well in this
plane. I have redesigned it around my Torque
2818T/900 an APC 13x6e propeller with a 3cell
2150mah battery. Any 300 to 350 watt motor would
work well.

Radio Equipment

This plane will require a good 4-channel radio with 4
mini servos or 4 standard servos is glow. The plane
has been tested with Hitec metal gear HS-81's.

Additional Items Required

Hardware
Four-Channel Radio with 4-5 Servos
Four control horns
Pushrods. 2-56 size pushrods were used in this manual.
"Y" Harness for Aileron, or computer radio
Motor - See Motor Selection
CA hinges
Propeller(refer to your motor's instructions for proper size)

Building Supplies and Tools

2 oz. Pro CA – Thin
White glue ( Elmer's )
1 – 2 rolls of covering material
Covering iron and heat gun
#1 Hobby Knife Handle
#11 Blades
© 2005 Quinn Coldiron
All rights reserved.
For additional information, please
contact:
www.billyhellrc.com

Kit Contents

Before starting to build, please inspect the kit
contents for broken or warped parts. If any parts
are broken or warped to the point that they can
not be used, please contact us, and if possible
email a picture of the part. Picture help us make
sure we get you the correct replacement part.
Please remember that we make every effort to
get a complete and issue free kit to you, but the
various shipping companies sometimes make
this difficult.
Before You Begin
Before we begin building, just a few quick items:
- The plans need to be taped to the
building board and wax paper needs to
be laid down to cover the plans.
- The wing is made up of 3 main parts and
the ribs: The leading edge, the spar and
the trailing edge. These should all be fit
st
together 1 , then glued as a single unit
3