ICPDAS iCAM-MR6422X Quick Start Manual page 4

 Connect the RJ-45 Ethernet cable with a waterproof connector
o First, remove the waterproof connector and unscrew the waterproof nut.
Insert the Ethernet cable and connect to the RJ-45 connector with proper
tools (PIC.5). Then, tighten the waterproof connector and nut before the
RJ-45 connector is connected to the camera (PIC.6).
3) Adjust the pan, tilt, and azimuth of the camera to the desired
location. Adjust the zoom and focus for the best image, and tighten
the screws after the adjustment (PIC.7). Secure the upper cover to
the bottom bracket with a hex key (PIC.8).
 Wall Mount IR Adjustment
o When wall mounting the
Varifocal Dome IR Camera,
remember to adjust the
infrared beam (PIC.9).
P.4