Inserting the red plastic strip of the keyboard
Required work steps:
■
Switching off the battery
■
Removing the lower assy
■
Removing the battery
■
Removing the keyboard
Figure 1
►
Slide the red plastic strip on the left side of the keyboard into the openings provided as shown in Figure 1.
►
Then push the plastic strip to the left until it stops under the keyboard (Figure 2).
►
Now insert the plastic strip on the right-hand side of the keyboard into the opening on the far right and then carefully press it
down until it snaps completely into place (Figure 4).
Figure 4
Return to Table of Contents
Page 28 of 49
Required tools:
■
Plastic tool
Figure 2
Figure 3