Introduction - YOKOGAWA DOX10 User Manual

Introduction

Media No. IM 12J05S01-01E
1st Edition: Feb. 2012 (YK)
All Rights Reserved, Copyright © 2012, Yokogawa Electric Corporation
IM 12J05S01-01E
The DOX10 power supply unit feeds power to the DO70G optical dissolved oxygen
sensor and the DO402G dissolved oxygen converter.
This unit can be installed outdoors.
Please read this document thoroughly before use to avoid damage, failure, or improper
operation of the unit.
Throughout this document, important handling instructions are indicated by Warning or
Caution depending on their importance. To ensure safety and prevent damage, users
must follow these instructions.
1. Confirming the Specifications
Make sure that the unit is exactly as ordered. A conduit adapter to protect cables is
included if ordered as an option.
2. Information Described in This Manual
This manual describes information on the specifications, installation, and wiring of the
DOX10.
For information on wiring to DO402G, refer to IM 12J05D02-01E.
The table below shows the instruction manuals of the relevant equipment used in the
dissolved oxygen measuring system.
Table: Manuals of Relevant Equipment Used in Dissolved Oxygen Measuring
System
Model Title of Manual
Dissolved Oxygen Converter
DO402G
Optical Dissolved Oxygen Sensor
DO70G
Power Supply Unit
DOX10
Angled Floating Ball Holder
PB350G
Vertical Floating Ball Holder
PB360G
Submersion Type Holder
DOX8HS
Cleaning Pump/Tank
PH8PU1
Note: The manuals in the table are only for the basic components
of the system.
For information on recorders, annunciators and other auxiliary
instruments, refer to respective instruction manuals.
Manual No.
IM 12J05D02-01E
IM 12J05D04-01E
IM 12J05S01-01E
IM 19H1E1-01E
IM 19H1E2-01E
IM 19H1D2-01E
IM 19C1E1-01E
Introduction
i