AT&T Calypso Max User Manual page 68

Swap
Bluetooth
Hangup all
Hangup
holding
Swap the calls .
Route the phone's audio through a connected
Bluetooth headset .
• When the call is routed to a Bluetooth headset,
the current call area shows the Bluetooth call
icon ( ) .
Note: The Headset button is activated to show
the current call is routed to the connected
Bluetooth headset .
• To route the current call back to the phone, tap
Headset to temporarily use the phone . Tap it
again to route the call back to the connected
Bluetooth headset .
• When Bluetooth or the Bluetooth headset is
turned off, the call will be routed through either
the earpiece or speaker and shows (
Hangup all active calls .
Hang up on hold calls .
) .
68