Summary of Contents for GDS ALLIGATOR
- Page 1 Assembly instructions // Instruction manual ALLIGATOR Fully automatic hydraulic expansion precision clamping system grinding deserves SOLUTIONS...
- Page 2 ALLIGATOR interference contour ALLIGATOR interference contour For information on intermediate sleeves, see page 8. 35,8 38,2 19,9 17,5 Machine spindle 25° As a result of continuous improvement and further development of our designs, the information and illustrations in this brochure are not binding.
- Page 3 ALLIGATOR Commissioning Dial gauge Adjustment pin Intermediate Sleeve Mounting screw For this and other user guides, scan this QR code: Or visit our website at: gds-praezision.de/gebrauchsanleitungen/...
- Page 4 Preparation Clean all contact surfaces of the chuck. Make sure that the face of the machine interface is level and clean. The ALLIGATOR chuck should be at ambient tempe- rature. Step 2: Screw in clamping claw Move the machine control to the front.
- Page 5 ALLIGATOR Commissioning Step 5: Insert intermediate sleeve with radial locking Insert the intermediate sleeve into the clamping system in line with the radial bore of the intermediate sleeve and the marking on the chuck. Now turn the blue ring to CLOSE (Fig. 2). If the blue ring...
- Page 6 ALLIGATOR Commissioning Setting concentricity and repeatability Please take the time to adjust the concentricity. The more accurately the chuck is set, the more accurately it will behave. Use precision dial gauges when adjusting. ATTENTION: Do not knock on the blue locking ring. To Pay attention to the quality of the setting pin.
- Page 7 For shank tools, all shanks according to DIN 1835 Form A, B, E or DIN 6535 Form HA, HB, HE can be clamped. • The ALLIGATOR series (chucks and intermediate sleeves) may only be used within the scope of their technical data. •...
- Page 8 ALLIGATOR ALLIGATOR hydraulic expansion precision clamping system The new can be used in the following tool grinding machines: ANCA ISOG Reinecker Saacke Walter Item No. Item No. Item No. Item No. 400002003 Item No. 400002002 400002005 400002006 Spindle with union nut 400002001 Item No.
- Page 9 GDS Präzisionszerspanungs GmbH Telefon: + 49 (0) 74 73 - 27 26 72 Endelbergstrasse 8 Telefax: + 49 (0) 74 73 - 27 26 49 D - 72131 Ofterdingen Email: sales@gds-praezision.de Web: www.gds-praezision.de...