Page 1
VOKKERO ELITE FCC User Guide Version 1.1 211426 VOKKERO VOGO NA (North America) VOGO 25 Main Street, 3rd Floor 101, place Pierre Duhem, Tuckahoe, NY 10707 Immeuble Les Centuries II, 34000 Montpellier, France www.vokkerousa.com www.vokkero.com...
Page 2
VOKKERO ELITE FCC | User Guide V1.1 • This guide describes the functionality of the system Vokkero® ELITE, options and accessories. It explains how to configure it to allow a conference-type communication between multiple users. • No part of this document may be reproduced or transmitted (in electronic or paper, or photocopying) without the agreement of Vokkero.
VOKKERO ELITE FCC | User Guide V1.1 Table des matières ENGLISH INFORMATIONS DISCLAIMER TECHNICAL SUPPORT INTRODUCTION ENVIRONMENTAL RECOMMENDATIONS WARNINGS DISPOSAL OF WASTE BY USERS IN PRIVATE HOUSEHOLDS WITHIN THE EUROPEAN UNION THIS SYMBOL ON THE DEVODE OR ITS PACKAGING MEANS THE USE OF A DC VOLTAGE.
KERO terms and conditions. They can be downloaded from www.vokkero.com VOKKERO makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice.
Page 6
COMPLIANCE TO FCC US/CAN This device complies with part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1). this device may not cause Harmful interference, and (2). this device must accept any interference received, including interference that may cause undesired operation of the device.
Page 7
FOR PORTABLE DEVICE USAGE (<20cm from body/SAR needed) Radiation Exposure Statement: This device complies with the FCC and ISED portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Page 8
Inside the stadium, a spectrum referent may be available to assist in frequency allocation. For the use of ELITE outside US/CAN, please contact customer support: “www.vokkero.com/Support/Technical Support”. In the VOKKERO HELPDESK space, log in with your identifiers (or sign up to create your account) to access the support.
Under no circumstances can the manufacturer, or the distributor of an VOKKERO program, be held liable for any damage caused by the use of the aforesaid program.
VOKKERO ELITE FCC | User Guide V1.1 DISPOSAL OF WASTE BY USERS IN PRIVATE HOUSEHOLDS This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste by taking it to a collection point designated for the recycling of electrical and electronic appliances.
• Optional Charger: VOKKERO ELITE - Charger : VO8363AA All the operating settings of the VOKKERO ELITE system are managed by the configurator which gives access to the Settings menu via a touchscreen. The configurator must be connected to the power unit (otherwise it will not work) and up to 4 extensions can be associated with the configurator.
VOKKERO ELITE FCC | User Guide V1.1 2. SYSTEM DESCRIPTION 2.1. VOKKERO ELITE FCC Terminal 2.1.1. Description of product interface Function button Set specific functionalities (recording start & stop…) On/Off button Turns the terminal On/Off Headset connector Gives battery life Connect to a VOKKERO headset.
• Status of the Network Icon shows that the terminal is connected or not to a VOKKERO conference. If icon blink: the terminal is searching for a VOKKERO conference. If icon is fixed: the terminal is connected to a VOKKERO conference or the terminal is the MASTER of the conference. ------------- Central Ref icon •...
------------- Recording Icon If icon does not appear: No recording. If icon is fixed: A recording of the VOKKERO conference is going-on. If icon blinks: The SD card for the recording cannot accept recording (full memory). 3.3. Connecting a headset 3.3.1.
The configurator has a USB port for updates. The configurator screen is a high-resistance touchscreen. Immediately upon starting up the system, the configurator displays the VOKKERO logo, with the software version of the configurator, followed by the Home Screen. 4.1. Home Screen The screen indicates the number of terminals that the charger has on it (each number corresponds to one terminal).
Page 17
Connect your main Wireless Interface (WI) on the USB dock of the configurator and turn on the Wireless Interface. Put at least 4 ELITE terminals on the charger Select which slot you want for MASTER (“Select Master device”). Can be either the CENTRAL REF (Master role given to the device in Slot n°1) or an assistant referee such as the 4th referee (Master role given to the device in slot n°4)
… In case you put less than 4 ELITE terminals on the charger, the Football “Quick Config.”won’t be possible. In that case the Football “Quick Config.” will propose to configure only additional terminals with the same role for all terminals aon the charger : LISTENER or SPARE REF 5.2.
CENTRAL REF will be sent to the others terminals / users. • VOKKERO filters : it is the default mode. It enables the noise filtering VOKKERO technology (only the voice is transmitted). The CENTRAL REF terminal audio out will be noise filtered, just as the other terminals.
• Central Ref role: Yes or No • Audio mode: Vokkero noise filter which is the standard default mode or eventually one of the two No- filter modes, see §5.3; the two latest being only possible for only possible with a Central Ref terminal.
Note: this is very helpful to have other users hearing the whistle while preserving their hearing health. We strongly recommend to keep the Whistle detector on with attenuation if you have selected another audio mode than VOKKERO filters during the Quick Configuration process for the CENTRAL REF to avoid any damage to other users audition.
VOKKERO ELITE FCC | User Guide V1.1 6.1.6. Sidetone The Sidetone mode enables you to turn on and adjust the audio return level (enabling you to listen to your own voice) in your headset. The default mode is OFF. 6.1.7.
VOKKERO ELITE FCC | User Guide V1.1 6.1.9. SD Card space This menu gives the remaining time that can be stored with the Recorder on the inserted SD Card. 6.1.10. Factory settings This menu brings back, to the factory settings, a terminal or all terminals connected to the configurator.
- To have only one Central REF in the conference (only one terminal with whistle icon) 6.2.3. Software This menu is used to update the software versions of the terminals. Contact our support or your VOKKERO dealer to obtain the most recent software version. 24 / 28...
Page 25
VOKKERO ELITE FCC | User Guide V1.1 Updating terminals To update terminals you have to use a USB key. The USB key used must be < or = 4Go. On the USB key: - Copy the update software to the root - The files mustn’t be in a folder...
In order to put the configurator back in factory mode (and thus cancel all the configuration changes made previously), do the following: Unplug the configurator Reconnect the configurator When the configurator is switched on, on the first home screen, consisting of the «VOKKERO®» logo: press the 2nd «O” of VOKKERO Then you can restore the default settings of the configurator Confirm...
VOKKERO ELITE FCC | User Guide V1.1 Updating the configurator To update the configurator you have to use a USB key. The USB key used must be < or = 4Go. On the USB key: - Copy the update software to the root - The files mustn’t be in a folder...
Need help?
Do you have a question about the ELITE and is the answer not in the manual?
Questions and answers