Disposal Of Packaging; Electrical Connection - Silvercrest SAD 12 A1 Operating Instructions Manual

Setting up and connecting

Disposal of packaging

The packaging protects the appliance against transport damage.
The packaging materials are selected from the point of view of
their environmental friendliness and disposal technology and are
therefore recyclable.
The recirculation of packaging into the material circuit
saves on raw material and reduces generated waste.
Dispose of packaging material that is no longer needed
according to the regionally established regulations.

Electrical connection

IMPORTANT
► Before you connect the appliance to the power supply, check
to ensure that the required input voltage as given on the type
plate tallies with that for the intended power source. To avoid
possible damage to the appliance this data must match.
► Check to ensure that the cable for the power adapter
is not damaged and that it does not lead over hot surfaces
and or sharp edges, otherwise it could be damaged.
► Ensure that the cable for the power adapter
or kinked.
♦ Connect the power adapter
plug into the plug socket
SAD 12 A1
to the appliance by inserting the
on the underside of the appliance.
is not over-taut
GB
7