Advertisement
Roof / Side wall
For the last polycarbonate panel assembly
1.
At first, You should dismantle the curved corner bar, by loosening the bolts attaching base, sill beam and horizontal rail bar
(Don't loosen ridge top and hanging basket bar bolts and nuts). And separate curved corner bar a little from bottom, and
make an angle with glazing bar (Like a trapezoid with right angle).
2.
Insert polycarbonate panel #I2 between curved corner bar and curved glazing bar first, and move to position.
3.
Sliding side panel #B between cross bar part #V042 and side sill bar with PVC anti-dust strip p7 on bottom.
4.
Finally, push them together, and tighten all the bolts and nuts which loosened before.
5.
Repeat this on the opposite side.
Loosen the bolt
I
2
I
2
②
I
2
①
18
②
I
2
①
I
2
I
2
Advertisement
