Operation - Matco Tools MT1630 Operating Instructions Manual

OPERATION

Always turn off the air supply, drain hose of air pressure
and detach tool from air supply before installing, removing or
adjusting any part or accessory on this tool, or before performing
any maintenance on this tool.
1. Tighten backing pad in a clockwise direction using the included
spanner wrench.
2. Attach polishing pad to the backing pad. Center properly.
3. Press trigger to activate.
4. For removal of velcro pad attachment use wrench key to fix
the shaft and turn the velcro pad attachment in counter
clockwise direction.
NOTE: During operation, safety goggles should always be worn
(users & bystanders).
MT1630
MT1630 3" Mini Composite Polisher
3 01/23/15