Levelling The Washing Machine - Zanussi ZWT80700W User Manual

LEVELLING THE WASHING MACHINE

WARNING! The lock nuts on feet
must be screwed tightly against the
housing.
F
A
E
D C B
>0mm
6
A. lock
B. Lower
C. Raise
D. Foot
E. Lock nut
F. Loosen
Completely sleeve the
drain hose over the sew-
er. Check if the legs are
closely attached to the
cabinet. If not, turn them
to their original positions
tighten the nuts.
Check alignment of the
product with a spirit level
and if required, correct.
Loosen the lock nut and
turn the feet until it close-
ly contacts with to the
floor.
After being locked prop-
erly, press four corners
again to make sure that
they has been adjusted
0mm
properly.