Table of Contents
Advertisement
OPTION SELECT MODE
NOTE: To exit Option Select Mode press and hold
the menu button.
Reset Features
All user features can be reset to factory settings.
Factory Reset
1. Unplug Power Cord from unit
2. Press and hold Quiet
3. Plug the Power Cord into the unit
(Power switch turned on)
4. Wait for 2 beeps
5. Release the Quiet button
Unit is now reset.
Factory Settings are:
• Highway Mode
• Dim/Dark Mode to full illumination of display
• Auto Quiet™ Mode OFF
• VG-2 Detection Mode OFF
• Self Test Mute OFF
• Voice® EN (CR73 Only)
• Alert Periscope to Blink
• POP™ Mode OFF
• SWS™ OFF
• TFSR OFF
• FDSR OFF
TROUBLESHOOTING GUIDE
Your Whistler detector is expertly engineered and
designed to exacting quality standards to provide
you with reliable, trouble-free operation. If your unit
has been correctly installed following the guidelines
in this guide, but is not operating optimally, please
refer to the troubleshooting guide below.
16
Advertisement
Table of Contents
