Table of Contents
Advertisement
20 electrolux
Arrangement cutlery basket
Installation
Warning! Any electrical and/or
plumbing work required to install
this appliance should be carried out
by a qualified electrician and/or
plumber or competent person.
Fitting under a counter (kitchen worktop
or sink)
Remove all packaging before positioning the
machine.
If possible, position the machine next to a
water tap and a drain.
By removing the machine's worktop, you can
install it under a close fitting sink unit or a pre-
existing top, providing the dimensions of the
recess correspond to those shown in the
picture.
Proceed as follows:
• Remove the machine's worktop by un-
screwing the two rear retaining screws (1),
pull the worktop from the back of the ma-
chine (2) and slide out the front slots, lifting
the worktop (3).
- Quick Links:
- What to Do if
Hide quick links:
Advertisement
Table of Contents
