Water drops have
dried onto glasses
and dishes
If after all these checks, the problem persists,
contact your local Service Force Centre.
Technical data
Dimensions
Electrical connection - Voltage -
Overall power - Fuse
Water supply pressure
Capacity
Hints for test institutes
Testing in accordance with EN 60704 must
be carried out with appliance fully loaded and
using the test programme (see "Consump-
tion values").
Test in accordance with EN 50242 must be
carried out when the salt container and rinse
Amount of detergent required:
Rinse aid setting
Arrangement upper basket (take off the
glass holder)
The wash results are not satisfactory
• Increase rinse aid dosage.
• The detergent may be the cause. Contact the detergent manufacturer con-
sumer care line.
Width
Height
Depth
Information on the electrical connection is given on the rating plate
on the inner edge of the dishwasher door.
Minimum
Maximum
Full load: 12 standard place settings
aid dispenser have been filled with salt and
rinse aid respectively and using the test pro-
gramme (see "Consumption values").
5 g + 25 g (Type B)
position 4 (Type III)
Arrangement lower basket
electrolux 19
60 cm
85 cm
63,5 cm
0,05 MPa (0,5 bar)
0,8 MPa (8 bar)
12 place settings