Table of Contents
Advertisement
28 Main Parts
– Consequential damage caused by continuing
to use the product with defective components.
27.1
Maintenance Work
All the operations described in the "Maintenance
Chart" must be performed on a regular basis. If
these maintenance operations cannot be per‐
formed by the owner, they should be performed
by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
If these maintenance operations are not carried
out as specified, the user assumes responsibility
for any damage that may occur. Among other
parts, this includes:
– Damage to the engine due to neglect or defi‐
cient maintenance (e.g. air and fuel filters),
incorrect carburetor adjustment or inadequate
cleaning of cooling air inlets (intake ports, cyl‐
inder fins).
– Corrosion and other consequential damage
resulting from improper storage.
– Damage to the machine resulting from the use
of poor quality replacement parts.
27.2
Parts Subject to Wear and Tear
Some parts of the power tool are subject to nor‐
mal wear and tear even during regular operation
in accordance with instructions and, depending
on the type and duration of use, have to be
replaced in good time. Among other parts, this
includes:
– Cutting attachments (all types)
– Mounting hardware for cutting attachments
(rider plate, nut, etc.)
– Deflectors for cutting attachments
– Clutch
– Filters (air, fuel)
– Rewind starter
– Spark plug
– Antivibration elements
0458-262-0121-C
28 Main Parts
8
7
2
9
1
6
10
11
18
12
19
20
1 Tank cap
2 Carburetor adjusting screws
3 Starter grip
4 Spark plug boot
5 Muffler
6 Bike handle (handlebar)
7 Throttle trigger
8 Slide control
9 Throttle trigger lockout
10 Carrying ring
11 Throttle cable retainer
12 Padding
13 Manual fuel pump
14 Choke knob
15 Air filter cover
16 Fuel tank
17 Machine support
18 Handle support
19 Metal cutting attachment
20 Limit stop
# Serial number
29 Specifications
29.1
Engine
STIHL single cylinder two-stroke engine
Displacement:
Bore:
Stroke:
English
4
3
5
#
13
14
10
15
11
16
17
40.2 cc
40 mm
32 mm
31
Advertisement
Table of Contents
