Maintenance; Spare Parts - Kayoba 012288 Operating Instructions Manual

EN
DRIVING
• Gently squeeze the trigger to slowly drive
forward. Squeeze harder to drive faster.
• Push forward the trigger to brake. Push
forward the trigger again to reverse.
FIG. 5
• Release the trigger if you crash.
• Turn the wheel to the left or right to turn.
FIG. 6
• Use the controls carefully.
NOTE:
• The product will stop moving when the
battery has discharged. Product has a
safety function that switches it off when
the battery is discharged to protect the
battery.
• Allow the battery to cool before
charging.
Trimming, control
Adjusting the front wheels left/right
• Adjust the front wheels if they are not
straight when the steering wheel is in
neutral.
• Repeat during driving.
FIG. 7

MAINTENANCE

• Check that all screw unions are properly
tightened.
• Lubricate moving parts with a suitable oil.
• Wipe off any dust and excess oil.
• Remove the battery from the remote
control when it is not in use.
• Remove the batteries from the product
when not in use.
28

SPARE PARTS

1. Headlight guard
2. Wing (for model no. 9302)
3. Receiver unit
4. Watertight electronic unit (upgrade part)
5. Cooling fin
6. Motor cooling fin (large)
7. Servomotor 9 g, 5-wire connection
8. Lithium-polymer battery 850 mAh, 7.4 V
9. Battery pack 1100 mAh, 7.4 V
10. USB charger lithium-polymer battery 7.4 V
11. 380 Motor
12. High speed motor (upgrade part)
13. Drive wheel 14 cogs
14. Drive wheel 17 cogs (upgrade part)
15. Charger
16. Remote control
17. Ring spanner
18. Phillips screwdriver 3 mm
19. Hex key 2 mm
20. Screw with shoulder, Ø 2.3 x 10 mm
FIG. 8
21. Screw with ball head, Ø 4.5 mm
22. Screw with ball head (upgrade part)
23. Universal joint sleeve, Ø 6 mm
24. Spring pins, Ø 10 mm
25. Wheel drive axle
26. Rocker arm Ø 2 x 39 mm
27. Wheel axle, Ø 2 x 20 mm
28. Oil bearing, Ø 8 x 12 x 3.5 mm
29. Oil bearing, Ø 6 x 10 x 3 mm
30. Ball bearing, Ø 8 x 12 x 3.5 mm
31. Ball bearing, Ø 6 x 10 x 3 mm
32. Ball bearing, Ø 4 x 8 x 3 mm
33. Lock nut M3
34. Shock-absorber